Choose a food container by the portion it must hold, the headspace needed to close it and the dimensions of the complete pack. For takeaway and deli buying, use the nominal oz size to shortlist a format, then confirm usable fill, the matching lid and case pack for the exact SKU. Start with the PP deli sizes in the catalogue comparison below.
| Nominal size label | Listed dimensions | Case pack | AW SKU |
|---|---|---|---|
| 8 oz | Ø116 × H44 mm | Confirm case pack | AW-BOX-PP-DELI-08 |
| 12 oz | Ø116 × H60 mm | Confirm case pack | AW-BOX-PP-DELI-12 |
| 16 oz | Ø116 × H77 mm | Confirm case pack | AW-BOX-PP-DELI-16 |
| 24 oz | Ø116 × H100 mm | Confirm case pack | AW-BOX-PP-DELI-24 |
| 32 oz | Ø116 × H138 mm | Confirm case pack | AW-BOX-PP-DELI-32 |
Which PP deli food container sizes are listed?
The comparison lists each PP deli SKU with its nominal size label and catalogue dimensions. Use the table to compare the available body formats, then open the product family to shortlist the exact model. These catalogue references do not establish internal dimensions, fill-line capacity or lid interchangeability.
Where the catalogue does not publish a case pack, the table says 'Confirm case pack'. Request pieces per inner pack, packs per case and whether a quoted unit includes a lid before comparing order quantities or prices.
Review PP deli container models and specifications
How should buyers compare oz and mL?
The oz entries in this table are the catalogue's nominal size labels. If your portion requirement is specified in millilitres, state that mL requirement separately and ask for the selected model's measured capacity. Do not present an arithmetic conversion of the size label as verified product capacity.
Ask which unit convention and capacity basis the supplier uses, including whether the figure describes brimful volume or an intended fill level. Usable fill also depends on food shape and required headspace. Volume in mL does not by itself establish the weight of a portion.
- Catalogue size label and AW SKU
- Required portion volume in mL, if used
- Capacity basis and measurement method
- Food shape or portion weight where relevant
- Headspace and closed-pack fit
Which measurements belong in a container brief?
State the nominal capacity when it is relevant, then add the dimensions that control product fit. For a rectangular or oval container these may include top length and width, base dimensions and height; for a round format, rim diameter, base diameter and height may matter.
Clarify whether measurements are internal or external and whether they refer to the body alone or the pack with its lid fitted. The illustration shows measurement concepts only. Request a model-specific drawing or measured sample to establish the actual measurement points and tolerances.
- Nominal capacity
- Top or rim dimensions
- Base dimensions
- Overall height
- Internal usable space
- Closed-pack dimensions
Compare takeaway container families
Which size will fit a takeaway portion?
Two containers with a similar stated capacity can distribute volume differently. A broad, shallow tray and a narrow, deep bowl may behave differently for presentation, portioning, stacking and access even when their nominal volumes appear close.
Use the actual portion and packing method to check fit. Leave the headspace needed for closing, garnish, movement in transport or the selected lid profile. A nominal capacity label cannot establish that fill line or prove suitability for the intended food and service conditions.
How should compartments be specified?
For divided trays, list the number of compartments and the portion assigned to each one. Add any food-separation requirement and confirm whether divider height continues to the lid or leaves a shared headspace.
A compartment count alone does not show the usable geometry. Review the actual layout with the intended meal, including sauces, side dishes and items that should remain visually separated.
Review plates, bowls and tray formats
What must be recorded about the lid?
Identify whether the container uses an integrated hinge, folded closure, separate lid or lidding film review. For a separate lid, record its reference alongside the base and confirm whether it changes the overall closed height.
Check closing method, opening experience, stacking and transport orientation with the actual components. Visual similarity or a shared rim measurement should not be treated as compatibility confirmation.
How does size affect packing and freight?
External dimensions and nesting geometry can change inner-pack length, case size and storage requirements. Ask for pieces per pack, packs per case, case dimensions and gross weight for each shortlisted model; confirm whether lids are packed separately or included in the count.
Compare logistics on the same unit basis. A piece price without pack and case information cannot show the full warehouse or freight implication of the format.
Prepare the full RFQ checklist
What should a size sample test include?
Fill the exact sample with the intended portion using the real packing method. Close it, hold it for the expected interval, stack it as planned and run the normal transport routine before recording the result.
Keep the AW SKU, body and lid references, portion volume or weight, headspace and observations together. Confirm specification, intended-use suitability, packing, documents and commercial terms in writing before ordering.
Review customization after format selection
Questions before quotation
What PP deli container sizes are listed?
The current ANWELLUP PP deli catalogue lists 8 oz, 12 oz, 16 oz, 24 oz, 32 oz. Compare the listed dimensions and confirm usable fill, lid pairing and case pack for the selected AW SKU.
Can I convert a container's oz label directly into its usable capacity in mL?
Treat the oz entry as a nominal catalogue size label. State your required mL fill separately and ask for the model's capacity basis, unit convention and measured fill level; a calculated conversion does not verify usable product capacity.
Can two containers with the same capacity be substituted?
Not automatically. Shape, usable space, wall geometry, closure, packing and service conditions can differ and should be reviewed by model.
How should a matched lid be requested?
List the base and lid references together and ask for compatibility, material, pack quantity and closed dimensions to be confirmed.
Do the listed PP deli sizes share a lid?
A common listed diameter does not confirm lid compatibility. Request the matching lid reference for each body SKU and check closure and stacking with the actual components.
How many PP deli containers come in a case?
Check the case-pack field for the selected body SKU. Where the table says 'Confirm case pack', ask for the count, inner-pack arrangement and whether lids are included or packed separately before requesting a quote.
Sources and further reading
ANWELLUP PP injection deli container catalogue
Continue your buying brief
Compare PP deli container sizes by SKU · Compare takeaway boxes and containers · Choose a takeaway container format · Build a complete packaging RFQ